Work Platform rack and pinion SCP
The drive principle of this Work Platform is basically same as construction hoists.
Its main parts can be exchanged with rack and pinion hoist.
Variety of combination of platform length and width, with wide applicability for construction.
Be safe and convenient for use in construction, wall decoration and ornament. This mast climbing work platform is able to replace suspended working platform and scalfford.
Convenient to install, dismantle.
The platform is equipped with manual sliding device and anti-incline protector. The platform is optimized and made of Q345 steel.
Technical Data - Work Platform rack and pinion SCP
|Model: SCP 350|
|Item||Single Mast||Twin Mast|
|Platform Length/Capacity||7.3m/1800kg; 10.3m/1500kg||8.4m/3500kg; 23.4m/2500kg|
|Platform Width||1.5m - 2.5m||1.5m - 2.5m|
|Distance between Mast Centre||/||7.2m - 13.2m|
|Anchors Interval||3m - 6m||3m - 6m|
|Height of First Anchor from Ground||4.5m||4.5m|
|Mast Section Size||650mm*650mm*1508mm||650mm*650mm*1508mm|
|Rated Lifting Speed||8m/minute||8m/minute|