Outdoor Rack and Pinion Construction Elevators - KP-B15, B16
The rollers of KANGBO hoists are non-eccentric, no need to adjust the clearance of rollers after installation. Avoid any mistakes caused by inexperienced.
What is the advantage of applying non-eccentric rollers on the rack and pinion construction elevators?
After the rack and pinion hoists are installed, the technicians must adjust the position of rollers to ensure the gaps between rollers and mast section pips are proper.
The rollers of lifts drive devices and hoist cars must be adjusted to be in place, and the gaps must be right, or, the elevators will shake or tremble when running.
And adjusting the rollers needs experiances and serious and careful attitude.
KANGBO Group finished this difficult jobs on its production line on behalf of KANGBO construction hoists users.
Apply non-eccentric rollers of elevator cars and drive devices mean the users don't need to adjust the rollers after installation.
Machine certified TUV according to European Regulation EN 12159:2012, EN 60204-1:2006/A1:2009.