Builders Pinion Rack Hoist Man Material - MP-B19, B20 L
Modularized and Standardized Production, Versatility of Components makes KANGBO builders hoist be efficient and low ownership cost for the users.
This rack and pinion builders elevator runs smoothly and stable with full load of 2.5 tons at speed of 0-80m/minute.
The drive devices and cars are generic and interchangeable. It means you can use 'A' hoist drive device on 'B' hoist car, or use left drive device on right car. Very convenient for the users, especially rental companies to handle and manage the equipments.
Made strictly according to European standard.
Hot dip galvanised mast sections. Sand blasting and painted cage structure. Galvanised steel plates as cage wall, ground enclosure and doors.
The edges of the car roof are totally welded. Users don't need to make waterproof layer on car roof by themselves, and never waterleakage.
Easy to install and maintain.
Extremely long working life.
Large capacity and High lifting speed with heavy duty.
Technical Data - Rack and Pinion Hoist - MP-B19, B20 L
|Max. lifting height||450 m|
|Cage width (internal)||1.6 m|
|Cage length (internal)||4.0 m|
|Cage height (internal)||2.9 m|
|Cage doors||entrance/exit door & side door|
|Motor control||FC control|
|Engine power per cage||38×3 kw|
|Gearbox||KANGBO Helical reducer|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650 mm with bolted rack|
|Length mast section||1.508 m|