Inclined Lifting Material Passenger Rack Pinion Elevator Hoist
Overview
SCQ200 inclined construction hoist is an inclined lifting machine that applies to the inclined buildings such as chimney, bridge, mine and power plant, etc.
Its flexibility, efficiency, safety, productivity, low energy consumption and low cost of ownership make it the best choice for construction and rental companies.
Main parts made of Q345 steel.
Variable Frequency Drive (VFD), low starting current, very smooth starting and stopping.
Features
* Standard big cage size, and, cage can be made according to the customer's request.
* The integrated and strenghten cage roof, made by a full tread plate totally welded one time to complete, ensures high strength and no leakage.
* Big and strong cage frame.
* Flap door available.
* The angle of inclination can be adjusted according to actual needs.
* LED lighting.
* Buzz alarm.
* Interlocked trap door.
* Frequency control drive units (FC), with closed-loop equipped.
* Easy access to electrical panel.
* Anti-falling safety braking system.
Technical Data
Payload capacity | 2,000 kg |
Lifting speed | 0–35 m/min. |
Angle range of inclination | 0 ~ 10° |
Max. lifting height | 300 |
Cage width (internal) | 1.5 m |
Cage length (internal) | 3.2 m |
Cage height (internal) | 2.35 m |
Motor control | FC control |
Engine power per cage | 2x11 kw |
Safety device type | centrifugal brake |
Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
Type of mast | square column 650*650 mm with bolted rack |
Length mast section | 1.508 m |
Rack modulus | 8 |
Construction Lift Multi Function Operating System is available.
The system is to provide intelligent human-machine communication, enhance the efficiency of construction lift and improve the energy saving. Its main characteristics are as follows.
* Automatic operation by button input or manual operation by control lever inside cage.
* The hoist will slow down automatically at ground floor in the case of manual operating.
* Provides automatic functions such as equipment status display, error detect display, repairing and commissioning recording.
* Automatic landing at the selected floor.
* Industrial PLC centralized control system.
* Centralized handheld remote control system of automatic storey selection and operation is available according to request.
With this system, the hoist can achieve continuous operation, automatic landing, no need manual control, easy operation, to reduce labor intensity.