Heavy Load High Speed 3 Door SC300/300 Builder Hoist
Truly modular hoist design.The modular and standardizing system makes the Kangbo MP-B15, MP-B16 Builder Hoist be flexible, efficient, low energy consumptive and ownership cost, making it the best choice for both construction and rental companies.
Use Q345 high strength steel to make the main parts of the hoists.
VFD with low starting current and much less wear and tear, very smooth starting and stopping.
An intelligent control System, functions of fault detect, display and alarm, and automatic cage landing/stop and floor selector, is available.
TUV proof according to European Regulation EN 12159: 2009.
* Max high speed up to 60meters a minute with full load of 3,000 KG.
* Racks centering at mast reduce partial load torque of hoists, makes hoists run more stably and smoothly.
* Applying non-eccentric rollers means faster installation and less error.
* Total welded cage roof ensure no water leakage.
* Car frame is large and strong.
* 'C' door for convenient loading/unloading.
* A frequency control unit (FC), with closed-loop, be equipped.
* Certified safety braking system.
|Payload capacity||3,000 kg|
|Lifting speed||0–60 m/min.|
|Max. lifting height||450 m|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Cage doors||3 doors (With an additional side door)|
|Motor control||FC control|
|Engine power per cage||3x23 kw|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650 mm with bolted rack|
|Length mast section||1.508 m|
|* Be equipped with a frequency control unit (FC), with closed-loop.|
Unique design Cage Door Counter-weight System and Mechanical Interlock of KANGBO Hoist
•The slide bar type cage door counter-weight system can prevent falling of counter-weight if the steel cable breaks.
•The weight of counter-weight can be adjusted according to the door.
•The mechanical interlock of cage loading door is made of fine steel die casting.
•The rolling contact of hook to touch plate is of less impact force and noise.
Why the cage trap door must be equipped with Gas Spring?
The Gas Spring which support the trap door is to prevent the trap door from falling, fast closing and cutting the hands and fingers of the operator and maintenance persons. Without this device, the trap door may fall and cut the fingers of persons, or hit their heads, when they are climbing up or down the trap.