SC250/250 0-80M 3 Door Man Material Building Pinion Rack Hoist
It is truly modular hoist design. So, the drive devices and cages are generic and interchangeable, and available in multiple kinds of doors or ramps.
The Kangbo MP-B19, MP-B20 hoist modular and standard system offers flexibility, efficiency, safety, productivity, low energy consumption and low cost of ownership, making it the ultimate choice for both construction and rental companies.
The structural part is made of 16Mn and Q345 high strength steel.
A small crane to facilitate the assembly of hoist.
Available in Single or twin cage.
VFD makes the hoist low starting current and much less wear and tear, very smooth starting and stopping.
Manual or Automatic Controls optional.
Intelligent control System, with functions of fault detect, display and alarm, and automatic cage landing/stop and floor selection, is available.
TUV certificate according to European Regulation EN 12159: 2009.
* High lifting speed and heavy load.
* High efficiency helical gearbox.
* The unique design of racks centering at mast reduces partial load torque of hoists, makes hoists run more stably and smoothly.
* Applying non-eccentric rollers whicn no need to adjust after installation, means faster installation and less error.
* The cage roof made by a full tread plate welded one time to complete enhance cage strength and ensure no rain leakage.
* The car frame is very big and strong.
* Available in flap door as loading/unloading ramp.
* Additional 'C' door by a side for convenient loading/unloading.
* LED Cage Light.
* Interlocked roof door.
* Drop test facility with remote control.
* Frequency control unit (FC), with closed-loop, is equipped.
* Composite Power & Control Cable, or Sliding contact line (Integrated Conductive Rail or Busbar).
* Easy access to electrical panels for maintenance.
* Certified safety braking system.
|Payload capacity||2,500 kg|
|Lifting speed||0–80 m/min.|
|Max. lifting height||450 m|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Cage doors||Entrance door, Exit door and Side door|
|Motor control||FC control|
|Engine power per cage||3x38 kw|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650 mm with bolted rack|
|Length mast section||1.508 m|
|* Be equipped with a frequency control unit (FC), with closed-loop.|